nilco SE 1400 Manual De Uso Y Mantenimiento página 9

For the setting of your machine, make the following operations:
1. Raise the upper tank after having released it by acting on the lateral hooks.
2. Fill the solution tank with cold or warm water, through the filling hole, adding a 5% of non-foaming
detergent (1/2 liter in 10 liters). Higher concentrations may be used in case of particularly dirty
surfaces.
Attention: wool carpet must be washed with cold water only!
3. Reconnect the upper tank to the lower tank with the lateral hooks (for the models Sabrina and Sabrina
Maxi only).
4. Connect the machine to the wand or to the accessory with the solution and with the vacuum hoses.
The quick-disconnect couplings at the end of the solution hose (the thin one) must be inserted in the
correspondent couplings: one is on the body of the machine and the other one is on the water valve
that you find on the wand or on the accessory handle.
Preparation for work
9