Sony CDP-CX230 Manual De Instrucciones página 16

Playing CDs
4
Push the JOG dial.
The track being programmed
PROGRAM1
DISC
2 0
The disc being
programmed
5
To program other discs/tracks, do the following:
To program
All tracks of another disc(s)
Other tracks on the same disc
Other tracks on other discs
6
Push the JOG dial or press · to start Program
Play.
To cancel Program Play
Press CONTINUE.
The programs remain even after Program Play ends
When you push the JOG dial or press ·, you can play
the same program again.
When you press PROGRAM to select Program Play
during Continuous or Shuffle Play
The program will be played after the current track.
The program remains until you erase it
Even if you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that are not found in the player or on the disc
are deleted from the program, and the rest of the
program is played in the programmed order.
Note
If you press one of the GROUP 1 – 8 buttons to start Group
Play, Program Play will be canceled (see page 21).
16 GB
2 0
CD1
TRACK STEP
3 1
Playing order
Repeat Steps
2 and 4
3 and 4
2 to 4
Creating a program using the remote Z
DISC
>10
CHECK
·
1
Press PROGRAM until the program number you
want (PROGRAM 1, 2 or 3) appears in the display.
2
Press DISC.
PROGRAM1
CD1
D I S C - [
3
Press the number button of the disc.
PROGRAM1
CD1
D I S C - [
4
To program a whole disc, press ENTER and go to
Step 6.
Press >10.
PROGRAM1
CD1
DISC TRACK
2 0 - -
5
Press the number button of the track.
When the disc has more than 10 tracks, press 0 first
then press the corresponding number to enter a
track number from 1 to 9.
The disc being programmed
PROGRAM1
DISC TRACK
2 0 3
The track being programmed
PROGRAM
Number
buttons
ENTER
CLEAR
2 0
_ ]
2 0
2 0 ]
2 0
STEP
1
2 0
STEP
1
Playing order