Chauvin Arnoux F403 Guía De Inicio página 12

English
1.1 THE SWITCH
The switch has six positions. To access the
switch to the desired function. Each setting is confirmed by an audible signal. The functions
are described in the table below.
6
5
4
3
2
1
1.2 THE KEYS OF THE KEYPAD
1 2
4 5
, , ,
Item
1 OFF mode – Switches the clamp
multimeter off
2 AC, DC voltage measurement (V)
3 Continuity test
Resistance measurement Ω
Diode test
4 AC, DC current measurement (A)
5 Temperature measurement (°C/°F)
6 Adapter function
3
Item
1 Storage of values, disabling of display
Zero correction A
Compensation of the resistance of the leads
in the continuity and ohmmeter function
2 Selection of the type of measurement (AC,
DC)
3 Activation or de-activation of the
backlighting
of the display unit
6
4 Activation or de-activation of the MAX/MIN
mode
Activation or de-activation of the INRUSH
mode in A
5 Frequency measurements (Hz)
6 Activation of ∆REL mode – Display of
differential and relative values
Clamp Multimeter F403
, , functions, set the
Function
Function
DC