PORTAMIX PH1816S Instrucciones De Uso página 3

MIXING M0TOR SPECIFICATIONS
Model Number
Rated Voltage
Power Input
Rated Current
Frequency
Spindle Connection
SAFETY INSTRUCTIONS
Safe work with the machine is only possible if you
read this operating instruction completely and strictly
follow the instructions.
Disconnect the mixer from the power source when
servicing or cleaning the mixer.
General safety instructions of the leaflet supplied
with the tool must be observed. Prior to the first use,
the user should familiarize themselves with the correct
operating procedures.
DO NOT put hands or foreign objects into the canister
whilst in operation or serious injury may result. Keep hands
and other articles well clear of the mixing shaft and canister
when mixing.
If the connecting cable is getting damaged or cut during
the work, immediately disconnect from power source.
Never use the machine with damaged connecting cable.
Ensure Protection lid (Code PH718) is fitted correctly
to prevent personal injury.
Do not use the tool in an environment with danger
of explosion.
Do not carry the tool at its cable, and always check
the tool, cable and plug before use. Repairs must be
carried out by certified service personnel. Only insert the
plug into the socket when the tool switch is off.
Modifications of the tool are prohibited.
Unplug and switch the machine off if it is not being
used e.g. when attaching or removing the motor or
mixing paddle.
03
PH1816S (240V)
PH1816S110 (110V)
230V / 110V
1800W / 1800W
7.9A
50 – 60Hz
M16
DANGER—SAFETY: Keep hands and other objects well clear of the mixing shaft and canister when mixer is in operation or serious injury could result.
Protection class
Degree of protection
Net weight
Interference suppression
Speed One
Speed Two
Switch the motor off if power supply is disrupted to
avoid unintentional start-up when power is turned on.
Do not use the machine if one part of the housing
is damaged or in case of damages on the switch,
cable or plug.
Machine operator must be in good physical condition
and mental health and not under the influence of any
substance (drugs, alcohol) which might impair vision,
dexterity or judgment.
While working always lead the line cord and extension
cord to the back away from the machine.
Electric tools have to be inspected visually
by a specialist in regular intervals.
Do not touch rotating parts
During use, the user must wear goggles,
ear protectors and protective gloves.
Ensure the 2 casters with brakes are locked on while
loading the mixing canister and during mixing operation.
Test the motor RCD for correct functionality
before starting work.
It is recommended to connect the Portamix
Mega Hippo to a power lead or power outlet fitted
with a RCD safety device.
II
IP20
6.9KG
EN 55014 and EN 61000
Unloaded/Loaded
220/120RPM
Unloaded/Loaded
670/410RPM