8
www.electrolux.com
4.4 Activating and deactivating
the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
Use sensor field:
To activate the outer ring: touch the
sensor field. The indicator comes on.
To activate more outer rings: touch the
same sensor field again. The subsequent
indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.
4.5 The Child Safety Device
This function prevents an accidental
operation of the hob.
5. HINTS AND TIPS
5.1 Cookware
5.2 Energy saving
• If it is possible, always put the lids on
the cookware.
When you activate the zone
but do not activate the outer
ring the light that comes out
from the zone may cover the
outer ring. It does not mean
that the outer ring is
activated. To see if the ring is
activated check the indicator.
WARNING!
Refer to Safety chapters.
The bottom of the cookware
must be as thick and flat as
possible.
Cookware made of
enamelled steel and with
aluminium or copper bottoms
can cause the colour change
on the glass-ceramic surface.
To activate the function: activate the
hob with
. Do not set the heat setting.
Touch
of the two front cooking zones
for 4 seconds.
comes on. Deactivate
the hob with
.
To deactivate the function: activate the
hob with
. Do not set the heat setting.
Touch
of the two front cooking zones
for 4 seconds.
comes on. Deactivate
the hob with
.
To override the function for only one
cooking time: activate the hob with
comes on. Touch
cooking zones for 4 seconds. Set the
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with
the function operates again.
• Put cookware on a cooking zone
before you start it.
• Use the residual heat to keep the food
warm or to melt it.
• The bottom of the pans and cooking
zones must have the same dimension.
5.3 Examples of cooking
applications
The data in the table is for
guidance only.
.
of the two front