Power Setting; Function Setting - Mestra 100514 Manual De Instrucciones

Installation of the filters
Take off right front cover.
Take out the pre-filter, HEPA, activated carbon + photo
catalyst filter, and tear off its PE bag. Please install filters
sequentially.
UV lamp replacing
Photo sensor is built-in the device, if the UV light is very
weak or not lighted, the UV icon on the product operating
panel will be flashing; it means UV lamp should be
replaced:
1. Take off the filter cover, and take out all filters. then
UV lamp can be replaced.
12
Take off right side cover
Install activated carbon
+ photo catalyst filter
Install HEPA
Install pre-filter
2. Hold the UV lamp and rotate it for 90 clockwise or
anticlockwise, then take it out.
3. Hold the UV lamp and rotate it for 90 clockwise or
anticlockwise, then install it well.

Power setting

Press the "POWER" icon on the product operating panel,
machine is entered the initial working status.

Function setting

Press the "Settings" icon on the product operating panel.
The anions and UV lamp can be chosen individually or
together.
Anions
UV lamp
Optional function