Timer Setting; Fan Speed Setting - Mestra 100514 Manual De Instrucciones

Timer setting

Long press "Timer" icon. The timing mode will start.
Press "Timer" icon several times. You can choose a time
from 0 to 12 hours. The function will start after 5 seconds.
Remarks:
(1) Press "Timer" button to preview time set.
(2) Keep pressing "Timer" button if you want to cancel
time setting.
(3) When time setting is finished, the unit turns to
normal working mode.

Fan speed setting

If the unit is set as intelligent mode, the fan speed can't
be adjusted.
Press the "Fan Speed" button to select the fan speed:
HIGH - MIDDLE - LOW
If you keep pressing it for 3 seconds, you will start the
sleep mode. Press any icon to cancel.
Intelligent setting
PM2.5 sensor is built-in. It checks the dust or particles
and display it by data.
The air quality indicator will be lighted after pressing the
"Auto" button. The machine checks the air quality and
control its working status automatically.
Remarks:
- The quantity of the air quality indicator means air
quality level and its working status.
- When you choose the intelligent mode, the device
will take 3 minutes to warm up, "Settings" icon is not
operative in this mode.
- When air humidity is above 80%, it will affect the
sensitivity of sensor, the PM2.5 data is just for your
reference.
PM2.5 abnormal performance correcting
After using the PM2.5 sensor for a long time, trace
amounts of particulate will adhere to the sensor inductive
head, it may cause the PM2.5 numerical display
abnormal.
When you find PM2.5 numerical severely deviated from
the normal range, here we advise you collect it as follow
steps
based on the weather forecast's PM2.5 numerical in your
city.
Best
Good
Mild-to-moderate polluted
Worst polluted
13