Mestra 100514 Manual De Instrucciones página 14

1. Open the window ventilated for 5 minutes (PM2.5
sensor will re-collection current environmental data).
2. Long press "function" icon, after heard a "click",
showing it antomatic switch to PM2.5 display
window, then enter PM2.5 correcting mode.
3. Each time you press "function" icon, the machine's
PM2.5 numerical will increase 2 ug/m
you press "smart" icon,
4. PM2.5 numerical will decrease 2 µg/m
5. When the PM2.5 numerical adjust to the PM2.5
numerical of your city's weather forecast, waiting 5
seconds, PM2.5 sensor collection finished.
Filters life time reset
If the filter icons are always flashing, it means the filters
life time comes to the end. Please clean or replace with
new filters.
After cleaning or replacing the filters, press "Reset" icon.
Filter icons will stop flashing and the unit will start to
record the filters using time.
Remark: "Reset" icon has refresh function. PM2.5 data
can be refreshed after pressing the "Reset" icon.
Pre-filter
Activated carbon
HEPA filter
14
FAQ
If the machine can't work properly, please kindly check
as below before you send it out for repair.
Problem
3 , each time
Do not work
.
3
Odor cannot
be removed
High noise
Air quality
indicator
doesn't
work
properly
Small
changes for
humidity or
temperature
data
If the problem still existed after above inspections, please
disconnect the power and send it for repair.
Checking Solution
methods
Please check if the Power plug
plug is should be
disconnected from plugged properly
the socket.
Please check if the Recover the
filter cover is filter cover
installed correctly
completely
Is there a very Suggesting to
strong odor in the ventilate, then
using start up the
environment? machine.
(Notes: air should
be purified
continuously)
Does the using life Please replace
time for activated new filters.
carbon filter come
to the end?
Is the PE bag for Please take out
filter removed? filters and tear
off PE bag.
Does the using life Please replace
time for HEPA new HEPA.
come to the end?
Is the air humidity Please move the
very high? machine to
Is the machine another
affected by fume room to test
or sprays? again.
Is the machine Please use this
using area too big? machine in
applicable room.