Prodigy AutoCode Manual Del Propietário página 25

PRODIGY AutoCode® Blood Glucose Meter
STEP 2: Recalling Average Test Results
The 7–day average is calculated
from the blood glucose results
obtained during the last 7 days.
It also indicates how many
blood glucose tests have been
performed within this period,
e.g., 21 (21 tests in the last 7
days). See Figure 36.
The 14–day average is calculated
from the blood glucose test
results obtained during the last
14 days. See Figure 37.
It, too, indicates how many
blood glucose tests have been
performed, e.g., 41 (41 tests in the
last 14 days). The 28–day average shows
the same information.
STEP 3: Recalling Individual Test Results
After the 28–day average, the most recent test
result with date and time will be shown. Press the
"M" button once and the next most recent test
result will appear. See Figure 38.
Owner's Manual
Each time you press and release
the "M" button, the meter
will recall up to your last 450
test results in order. When the
memory is full, the oldest test
result is deleted as the newest is
added. After reaching the last
individual result, press the "M"
Figure 36
button and the meter turns off.
STEP 4: Exit the Memory Mode
Press and hold the "M" button for four (4)
seconds to exit memory mode at any point.
Figure 37
48
PRODIGY AutoCode® Blood Glucose Meter
Voice Speaks: "Please insert the test strip"
Important: If you do not press any buttons for
one (1) minute, the meter will display "OFF"
and turn off automatically.
Owner's Manual
Figure 38
49