Ebode TAKE 6IR+RF Guia Del Usuario página 11

the corresponding device (e.g. control of TV sound in
DVR, DVD, etc... mode).
- Hold down the S (8) key until the LED remains lit.
- Release the S (8) key.
- Press and hold the MUTE (3) key until the LED flashes
once, then release the MUTE key.
- Press the required mode key, e.g. TV, corresponding to
the device that will control the VOL and MUTE buttons for
ALL the device Modes.
- Press and release the MUTE (3) key and the LED turns off.
Adjustment of the volume controls for EACH mode.
You can allocate volume control to be individual for
each mode selected, providing that volume control exists
on the corresponding device (e.g. control of the
television set sound in TV mode, the control of the sound
of the STB receiver in STB mode, ...).
- Hold down the S (8) key until the LED remains lit.
- Release the S (8) key.
- Press and hold the MUTE (3) key until the LED flashes
once, then release the MUTE key.
- Press the required mode key, e.g. DVD, corresponding to
the device that will control its own VOL and MUTE keys.
- Press and release the VOL - (5) key once.
- Press and release the MUTE (3) key once and the LED
turns off.
4.8 ebode / X10 Home Automation Control
The TAKE 6 remote control allows you to command all
electric appliances you have in your house. Here are
some examples that you can do with your TAKE 6 remote
using ebode/X10 home automation modules:
• Dim the lights and switch them on and off while
watching TV.
• Turn the coffee machine on from your bedroom when
you wake up in the morning.
• Turn your lights on at night to scare off intruders when
you hear noises.
• Switch on your electric blanket before the movie ends,
so you can enjoy a warm bed once the movie is finished.
• Switch everything off with a single press of a button
when you go to bed.
ebode / X10 Home Automation: control all electrical
appliances with one remote control
The TAKE 6 Remote has two transmitters: an infrared (IR)
transmitter and a radio frequency (RF) transmitter. This
allows you to operate practically anything. You can
operate your TV, video etc. with the infrared (IR)
technology. The ebode / X10 radio frequency (RF)
technology makes it possible to operate lights and
appliances from anywhere in the home.
To control your lights and appliances, you need an IR7203
or ebode / X10 Transceiver module and some ebode /
X10 Home Automation Modules, which can simply be
plugged in the socket. Extra wires are not necessary. Use
a Transceiver Module (available separately) and connect
your table lamp or other electrical appliance. Switch
on/off: control everything with the TAKE 6. The Transceiver
Module converts the RF signals of the TAKE 6 into an
ebode / X10 signal that is transferred via the mains power
line. All other ebode / X10 modules that are connected to
your mains, are also operate able through the TAKE 6
Remote. Ask your dealer for more information.
13-3-2014 11 ebode TAKE6 IR/RF