Automatic Needle Threader - Singer 2263 Manual De Instrucciones

⚠
For safety, turn off the power before using the automatic needle threader.
5
A
B
6
8
Pull about 6-8" of thread to the back beyond the eye of the needle. This will help prevent the
needle from becoming unthreaded when you start to sew.
GETTING READY TO SEW

Automatic Needle Threader

1. Raise the needle to its highest position by
turning the handwheel toward you. If you turn
the handwheel backward, the machine will jam
when you start to sew.
2.
(A), then press lever as far down as it will go (B),
bringing the hook pin into the eye of the needle.
3. The threader mechanism has a small hook pin
that goes through the eye of the needle. Bring
the thread around the guide at the left, and then
place the thread under the hook pin.
4. Release the needle threader lever and the
thread tail at the same time. The hook pin will
move back, creating a loop of thread at the back
side of the needle.
5. Pull the loop through the needle eye, until the
thread tail passes through the needle.
2
15