Maintaining And Cleaning - SEVERIN CY 7070 Manual De Instrucciones

CY7070.book Seite 15 Mittwoch, 11. Februar 2015 2:34 14

Maintaining and cleaning

Emptying the dust container
4 Maintaining and cleaning
– Before changing the dust container, switch off the appliance and disconnect the plug from the
mains socket.
– Empty the dust container at the latest:
To empty the dust container, see also illustrated Quick Start Guide.
Cleaning or replacing the filter
– Before changing the filter or filter cleaning, switch off the appliance and disconnect the plug from
the outlet.
– The motor filter can be washed, however it cannot be washed in the dishwasher or washing ma-
chine. Rinse the motor filter out thoroughly under running water (illustrated Quick Start Guide,
page 3). Let the motor filter dry for approx. 24 hours at room temperature after cleaning.
Only insert the motor filter when it is completely dry.
– First knock out the exhaust filter for cleaning, then brush with a soft brush (illustrated Quick
Start Guide, page 4).
For the filter cleaning, see also illustrated Quick Start Guide.
Cleaning
– Before cleaning, switch off the appliance and disconnect the plug from the outlet.
– The housing and power cable may not be handled with liquids or immersed in liquids for reasons
of electrical safety. Rub housing with a slightly damp cloth and then dry.
– For cleaning, do not use any sharp or scouring cleansers or hard brushes.
- if the emptying indicator lights up (see figure to the left),
- before longer storage or
- before shipping.
The contents of the dust container can be disposed of in normal house-
hold garbage unless it contains dirt that is forbidden in the household
garbage.
15