Sony BKM-250TGM Manual De Instrucciones página 7

Precaution
On simultaneous use with an
electrosurgical knife, etc.
If this unit is used together with an
electrosurgical knife, etc., the picture may be
disturbed, warped or otherwise abnormal as a
result of strong radio waves or voltages from
the device. This is not a malfunction.
When you use this unit simultaneously with a
device from which strong radio waves or
voltages are emitted, confirm the effect of this
before using such devices, and install this unit
in a way that minimizes the effect of radio
wave interference.
On moisture condensation
If the unit is suddenly taken from a cold to a
warm location, or if ambient temperature
suddenly rises, moisture may form on the outer
surface of the unit and/or inside of the unit.
This is known as condensation. If condensation
occurs, turn off the unit and wait until the
condensation clears before operating the unit.
Operating the unit while condensation is
present may damage the unit.
On parts life expectancy
The life expectancy of the electrolytic
capacitor is about 5 years under normal
operating temperatures and normal usage (8
hours per day; 25 days per month). If usage
exceeds the above normal usage frequency, the
life expectancy may be reduced
correspondingly.
Overview
This unit is a video signal input adaptor for
Sony monitors.
When installed in an input option slot on the
main unit, it provides video input and output
connectors for the main unit and a decoder for
3G/HD/SD serial digital component signals.
Notes
• There are some monitors that are not
compatible with this unit.
To check if the monitor is compatible with
this unit, refer to the instructions for use for
the monitor.
• The model name displayed on the monitor's
STATUS menu is "BKM-250TG."
Function
Decoder for serial digital component
signals
The BKM-250TGM supports 3G-SDI that
transmits 1080/50P or 1080/60P signals using
a single BNC cable, and is equipped with a
built-in decoder for 3G/HD/SD serial digital
component signal.
Serial digital input and output signal
connector
The BKM-250TGM is equipped with two
input connectors and monitor output
connectors that correspond to each input signal
for serial digital signals.
Precaution / Overview / Function
GB
3
GB