Preventive Maintenance; Corrective Maintenance; Environmental Guidelines And Recommendations - Schulz Hidropo Manual De Instrucciones

9. PREVENTIVE MAINTENANCE

ATTENTION
recommendations below:
Maintenance and cleaning:
Before performing any cleaning or maintenance, unplug the tool from the power grid;
After use, clean the tool with a damp cloth (do not pour water on the tool) and store it in a clean, dry place
protected from moisture and dust. Keep your tool out of reach of children and people unfamiliar with the use of
the equipment.
Transportation:
Do not pull or carry the tool by the electric cord or allow its contact with edges, sharp elements, rough surfaces,
oil or chemicals that may damage its fl exible and insulating properties.
Repairs:
If required to perform any repair or replacement of the electric motor brushes, contact the nearest Schulz assis-
tance. Original parts Schulz must be used. The use of non-original parts results in warranty loss and may cause
damage to the equipment or injury.

10. CORRECTIVE MAINTENANCE

To guarantee product SAFETY and RELIABILITY, repairs, maintenance and adjustments must be performed by the
nearest SCHULZ AUTHORIZED DEALER, which uses genuine parts.

11. ENVIRONMENTAL GUIDELINES AND RECOMMENDATIONS

1. Wastewater Disposal:
The presence of untreated wastewater into rivers, lakes or other water receiving bodies may adversely affect
marine life and water quality.
Schulz Compressores S.A. recommends correct treatment of wastewater through processes that ensure envi-
ronmental protection and healthy quality of life in compliance with the regulatory requirements of the current
legislation.
2. Disposal of Solid Waste (large parts and product packaging):
The generation of solid waste is one aspect that must be considered by the user, in the use and the maintenance
of the equipment. The impacts caused in the environment may cause signifi cant changes in the soil quality, water
quality in surface and subsoil and the health of the population, through improper waste disposal (on streets,
water receiving bodies, landfi lls or plots, etc). Schulz Compressores S.A. recommends the management of the
waste derived from the product from its generation, handling, and treatment to its fi nal disposal. A suitable
management should consider the following stages: quantifi cation, qualifi cation, classifi cation, source reduction,
collection and selective collection, recycling, storage, transportation treatment and fi nal destination. Waste
disposal should be done in compliance to regulatory requirements of current legislation.
To guarantee perfect operation and increase the lifespan of your equipment, follow the
28