Regulations; Technical Data; Eu Declaration Of Conformity - stayer TH610 Manual De Instrucciones

Ocultar thumbs Ver también para TH610:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1

6. Regulations

6.1 Technical Data

= Rated power input
= Load speed
rpm
= Percussion
ipm
= Diameter of drill
= Maximum drilling, steel
= Maximum drilling, stone
= Maximum drilling, wood
= Weight
kg
L
= Sound power level
WA
L
= Sound pressure level
A
P
= Vibration
The values given are valid for nominal voltages [U] 230/240 V ~
50/60 Hz - 110/120 V ~ 60Hz. For lower voltage and models for
specific countries, these values can vary. Please observe the
article number on the type plate of your machine. The trade names
of the individual machines may vary.
Noise/Vibration Information
Sound and vibration values were measured in accordance
with EN 60745.
¡
Wear hearing protection
Sound pressure level, L
pA
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Hammer drilling into concrete (handle)
Vibration emission value a = 13,7 m/s²
Uncertainty K = 1,5 m/s²
Hammer drilling in concrete (additional handle)
Vibration emission value a = 10,910 m/s
2
K uncertainty = 1,5 m/s
Drilling into metal (handle)
Vibration emission value a = 4,503 m/s²
Uncertainty K = 1,5 m/s²
Drilling in metal (additional handle)
Vibration emission value a = 5,372 m/s
2
Imprecisión K = 1,5 m/s
Important!
El valor de las vibraciones cambia dependiendo del ámbito
de aplicación de la herramienta eléctrica, por lo que en
casos excepcionales puede superar al valor indicado.
!
97,5 dB(A)
3 dB
105 dB(A)
3 dB
h
2
h
h
2
h
ENGLISH
12

6.2 EU declaration of conformity

The undersigned:
STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
That the machine:
Type: DRILLS / DRILLS / HAMMERS
Models: TH610 / TH610A / TH710A / TH710AK /
TH1000AK
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents:
EN 60745-1, EN 60745-2-1, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3 according to EU Regulations
2006/42/EC, 2014/30/EU.
Ramiro de la Fuente
Managing Director
January, 2018
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Th610aTh710aTh710akTh1000ak

Tabla de contenido