Dremel 7700 Instrucciones De Funcionamiento página 13

1600A016V4.qxp_7700 1/15/18 9:32 AM Page 13
balance on abrasive wheel points, before each use,
with the wheel point secured in the collet, turn on the
Cordless Rotary Tool and run the 415 Dressing Stone
(not included, available as accessory) lightly against
the revolving wheel point. This removes high spots and
trues up the wheel point for good balance.
Introduction
The Cordless Rotary Tool is a handful of high-speed
power. It serves as a carver, a grinder, polisher,
sander, cutter, power brush, drill and more.
Your Cordless Rotary Tool has a small, powerful elec -
tric motor, is comfort able in the hand, and is made to
accept a large variety of accessories including abra-
sive wheels, drill bits, wire brushes, polishers,
engraving cutters, and cutting wheels. Accessories
come in a variety of shapes and permit you to do a
num ber of different jobs. As you be come familiar with
the range of accessories and their uses, you will learn
just how versatile your Cordless Rotary Tool is. You'll
see dozens of uses you hadn't thought of before now.
The real secret of the Cordless Rotary Tool is its
speed. To understand the advantages of its high
speed, you have to know that the standard portable
electric drill runs at speeds up to 2,800 revolutions
per minute. The typical electric drill is a low-speed,
high torque tool; the Cordless Rotary Tool is just the
opposite — a high-speed, low torque tool. The chief
difference to the user is that in the high speed tools,
the speed combined with the acces sory mounted in
the collet does the work. You don't apply pressure to
the tool, but simply hold and guide it. In the low speed
tools, you not only guide the tool, but also apply pres -
sure to it, as you do, for example, when drilling a hole.
It is this high speed, along with its compact size and
wide variety of special accessories, that makes your
Cordless Rotary Tool differ ent from other power
tools. The speed enables it to do jobs low speed tools
cannot do, such as en graving glass, etc.
Remember, your new Dremel Cordless Rotary Tool is
the finest power tool of its kind. But its performance
is only as good as the accessories with which it is
used. We recommend only Dremel accessories be
used. Use of any other accessories may create a haz-
ard. We hope you'll enjoy many years of trouble free
pleasure from your Dremel Cordless Rotary Tool.
Operation Instructions
Getting the most out of your Cordless Rotary Tool is
a matter of learning how to let this speed work for
you.
Releasing and inserting battery Pack
Remove the battery pack from the tool by squeezing
the two tabs on the battery pack together and slide the
battery pack out of the tool.
The Model 7700 Cordless Rotary Tool battery pack is
not fully charged. The tool is equipped with a remov-
able battery pack. Be sure to charge pack prior to ini-
tial use. For best re sults on first charge, charge pack
overnight.
1. Put the switch in the "OFF" position.
2. Squeeze release tabs on both sides of battery pack,
and remove pack from back of tool.
3. Align exterior shape of battery pack with exterior
shape of charger, squeeze release tabs, insert bat-
tery pack into charger as shown and release pres-
sure on tabs so it locks in place.
13
BATTERY PACK
RELEASE TAB
Charging the tool
To charge the tool: