Dremel 7700 Instrucciones De Funcionamiento página 22

1600A016V4.qxp_7700 1/15/18 9:32 AM Page 22
Aluminum Oxide Abrasive Wheels
Use to remove paint, deburr metal, polish stainless
steel and other metals. Available in medium grit. 1/8"
shank.
Sanding Accessories
Sanding discs in fine, medium and coarse grades are
made to fit mandrel No. 402 and EZ407. They can be
used for nearly any small sanding job you might have,
from model making to fine furniture finish ing. In addi-
tion, there is the drum sander, a tiny drum which fits
into the Rotary Tool and makes it possible to shape
wood, smooth fiberglass, sand inside curves and
other diffi cult places, and other sanding jobs. You
replace the sanding bands on the drum as they
become worn and lose their grit. Bands come in fine
medium and coarse grades. Flapwheels grind and
polish flat or contoured surfaces. They are used most
effectively as a finishing sander after heavier surface
sanding and material removal is completed.
Flapwheels come in fine and coarse grades. Buffs are
a great finishing accessory for cleaning and light
sanding. They work effectively on metal, glass, wood,
aluminum and plastics. Coarse and medium buffs are
sold together. All buffs are sold individually. Do not
exceed 15,000 RPM in speed. 1/8" shank.
Grinding Wheel
Use for deburring, removing rust, and general purpose
grinding. Use with Mandrel #402.
Cutting Wheels
These thin discs of emery or fiberglass are used for
slicing, cutting off and similar operations. Use them
for cutting off frozen bolt heads and nuts, or to reslot
a screw head which has become so damaged that the
screwdriver won't work in it. Fine for cutting BX cable,
small rods, tubing, cable and cutting rectangular
holes in sheet metal.
Drywall Cutting Bit
Gives you fast, clean cuts in drywall. Use with Dremel
No 565/566 Cutting Guide attachment.
Tile Cutting Bit
Cuts ceramic wall tile, cement board, and plaster. Use
with Dremel No 565/566 Cutting Guide attachment.
Spiral Cutting Bit
Cuts through all types of wood and wood composites.
Use with Dremel No 565/566 Cutting Guide attach-
ment.
22