Publicidad
Idiomas disponibles
Idiomas disponibles
Operating instructions for the detachable tow ball
Important!
Check the following points to ensure correct locking of the detachable tow ball before each journey:
• The green marking on the handwheel is aligned with the green area on the tow ball.
• The handwheel is resting against the tow ball (no gap).
• The lock is closed and the key is withdrawn. The handwheel cannot be pulled out.
• The tow ball must be fully inserted into the receiver and be tight. Check by shaking it.
Repeat the installation procedure if any of the 4 checks is not satisfactory.
To avoid the risk of accidents the towing device should not be used if any of the requirements is not met.
Contact the manufacturer if this occurs.
The tow ball can be easily installed and removed with the normal force of your hands.
Never use any sort of aids or tools etc. as this might damage the mechanism.
Never unlock if trailers are attached or load bearing implements mounted!
Always remove the tow ball and insert the plug into the receiver for journeys without a trailer or load bearing
implement. This is especially important if the tow ball impedes sight of the vehicle's registration number or
lights.
Detachable tow ball
8
Locked position, operating condition
2
5
2
14
1
3
3
13
2
4
5
10
9
11
12
1
5
10
9
7
6
1
2
3
4
5
6
7
b
8
a
9
10 Green marking (tow ball)
7
6
11 Symbol (release)
12 Plug
13 Stop pin
14 No gap between 2 and 5
15 Gap of approx. 5 mm
Unlocked position, tow ball not mounted
Receiver
Tow ball
Locking balls
Release lever
Handwheel
Cover
Key
Red marking (handwheel)
Green marking (handwheel)
2
5
3
15
2
10
8
3
13
5
7
51
Publicidad
