Using The Coffee Maker; Setting The Clock; Setting Brew Strength - Kitchen Aid KCM1209 Manual Del Usuario

USING THE COFFEE MAKER

SETTING THE CLOCK

NOTE: When the Coffee Maker is first plugged in or when power is restored after an
interruption, the display will initially show 12:00 A.M.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
1
2
3

SETTING BREW STRENGTH

1
NOTE: Regular is the default brew strength setting.
6 | USING THE COFFEE MAKER
WARNING
Electrical Shock Hazard
Cord is stored in base. If needed, gently pull cord
outwards until fully extended, or just long enough to
reach the outlet. Plug into a grounded 3 prong outlet.
To set the hour: Press HOUR.
The Hour setting will begin to blink. The Hour digits
will change with each press; or press and hold
to scroll rapidly.
To set the minutes: Press MINUTE.
The Hour setting will switch to a solid display and the
Minute setting will begin to blink. The Minute digits
will change with each press; or press and hold to scroll
rapidly.
To save the current displayed time and exit clock
setup: Press any other button (Auto Set1, Auto Set 2,
Plate Temp, Plate Timer, Bold, Clean or Brew); or do
not press any button for 10 seconds.
To switch between Regular and Bold brew strengths:
Press the BOLD button.
Please note: While brewing small batches (2-4 cups),
using the "Bold Setting" is recommended.