GB
Stand grill / Table-top grill
Dear Customer,
Before using the appliance, read the following instructions
carefully and keep this manual for future reference. The
appliance must only be used by persons familiar with these
instructions.
Familiarisation
1.
Wind-guard, 2 parts
2.
Grill rack, 2 parts
3.
Heating element with junction box
4.
Rotary control with display and light-ring
5.
Power cord with plug
6. Reflector tray inserts
7. Reflector tray
8.
Grill housing with cover
9.
Core thermometer, 2 pieces
10. Cable lead for core thermometer (on both sides)
Models with grill cart:
11. Side storage tables, 2 pieces
12. Grill cart frame
13. Support legs wheel-side, 2 pieces
14. Wheels, 2 pieces
15. Wheel axle
16. Frame for storage rack
17. Support legs, 2 pieces
18. Storage rack
Not shown:
8 bolts, big
4 bolts, small with nut
2 wheel covers
2 cotter pins
4 towel hooks
Important safety instructions
∙ The appliance should only be
connected to an earthed socket
installed in accordance with the
regulations.
∙ The appliance is also designed for
outdoor use, and must therefore be
operated with an additional earth-
leakage circuit-breaker with a rated
tripping current not exceeding 30mA.
∙ Make sure that the supply voltage
corresponds with the voltage marked
on the rating label.
∙ The power cord should be regularly
10
examined for any signs of damage.
In the event of such damage being
found, the appliance must no longer
be used.
∙ In order to avoid hazards, and to
comply with safety requirements,
repairs to this electrical appliance or
its power cord must be carried out by
our customer service. If repairs are
needed, please contact our customer
service department by phone or email
(see appendix).
∙
Caution: This symbol
indicates that the wind-guard,
grill rack and heating element may
become very hot during operation -
there is a danger of burns.
∙ Before cleaning the grill, ensure it is
disconnected from the power supply
and has completely cooled down.
∙ To avoid the risk of electric shock,
the heating element with sensor and
power cord and the core thermometer
must not be immersed in liquid or even
allowed to come into contact with it.
∙ C lean the grill rack, reflector tray, the
tray inserts and wind-guard with hot
soapy water, or in a dish-washer. For
detailed information on cleaning the
appliance, please refer to the section
Cleaning and care.
∙ The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system.
∙ Do not, under any circumstances, use
charcoal or any other solid or liquid
fuel to operate the grill.