Flex L 7-12 115 Manual De Instrucciones página 8

Instruction manual
(c) Wheels must be used only for
recommended applications. For example:
do not grind with the side of cut-off wheel.
Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to
these wheels may cause them to shatter.
(d) Always use undamaged clamping
flanges in the correct size and shape for the
grinding disc you have selected.
Suitable flanges support the grinding
disc and therefore reduce the risk of the
grinding disc breaking. Flanges for cutting-
off wheels may differ from the flanges for
other grinding discs.
(e) Do not use worn grinding discs from
larger electric power tools.
Grinding discs for larger electric power tools
are not designed for the higher speeds of
smaller electric power tools and may burst.
4. Additional Warnings
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals
known to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
Ó lead from lead-based paints,
Ó crystalline silica from bricks and cement
and other masonry products, and
Ó arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
5. Definitions for symbols used on
this tool
V ..............volts
~
..............alternating current
Hz ...........hertz
SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE
TO OTHER USERS AND OWNERS OF THIS TOOL!
8
L 7-12 115 / L 8-11 125 / L 10-11 125 / L 14-11 125 / LE 14-11 125
A.............. amperes
n .............. rated speed
-1
min ........ revolutions per minute
............ double insulation
.......... Wear safety goggles!
WARNING - to reduce risk of
injury, user must read instruction
manual.
6. Double insulation for safer
operation
To ensure safer operation of this power tool,
FLEX has adopted a double insulation
"
design. Double insulation
physically separated insulation systems
have been used to insulate the electrically
conductive materials connected to the
power supply from the outer frame handled
by the operator. Therefore, either the symbol
"
or the words Double insulation
on the power tool or on the nameplate.
Although this system has no external
grounding, you must still follow the normal
electrical safety precautions given in this
Instruction Manual, including not using the
power tool in wet environments.
To keep the double insulation system
effective, follow these precautions:
Ó Only FLEX AUTHORIZED SERVICE
CENTER should disassemble or
assemble this power tool, and only
genuine FLEX replacement parts should
be installed.
Ó Clean the exterior of the power tool only
with a soft cloth moistened with soapy
water, and dry thoroughly.
Ó Never use solvents, gasoline or thinners
on plastic components; otherwise the
plastic may dissolve.
"
means that two
"
appear