Technical Data; Optional Accessories - Marmitek CONNECT 350 Modo De Empleo

Remote control does not work
• You should point the remote control at the external infrared receiver, not at the switcher.
• Infrared signals have a maximum reach of approximately 10 metres. Try a shorter distance.
• Replace the battery in the remote control, it could be empty.
Do you still have questions? Please check out www.marmitek.com for more information.

TECHNICAL DATA

Resolution
Supported HDTV Resolutions
Supported PC Resolution (max)
Maximal Pixel Frequency (max)
Maximal Bit Rate (max)
In- and outputs
HDMI Input (19-pin female)
HDMI Output (19-pin female)
Maximal HDMI cable length
Remote control
Infrared remote control
Housing Switcher
Dimensions (H x W x D)
Weight
Ambient
Ambient temperature
Ambient humidity
Power
External power adaptor
Specifications may be modified without prior notice.

OPTIONAL ACCESSORIES

Infrared extension
Marmitek offers several products to operate your devices, even when these are placed in a
closed cupboard or in a different room. This as well wired as wireless. More information about
these so called infrared extenders can be found at www.marmitek.com.
Extra remote control
If you want to operate your device from various places in your home, or if you want to use just
one single remote control for all your A/V devices, then make your choice from the complete
range of Marmitek universal remote controls; EasyControl or EasyTouch. These replace almost
6
All manuals and user guides at all-guides.com
480p, 576i, 576p, 720p, 1080i, 1080p
1920 x 1200
225 MHz
2.25 Gbps
5 HDMI
1 HDMI
15 metres
Battery included CR2025
80 x 18 x 58mm
250 g
+0 to +40° C
10% to 85%
Input: 100-240VAC @50-60Hz Output: 5VDC @ 300mA
© MARMITEK