Kohler K-3546 Guia De Instalacion página 5

3. Install the Tank
CAUTION: Risk of product damage. Overtightening the bolts
may cause breakage or chipping of the vitreous china.
NOTE: The tank bolts come preassembled to the bottom of the tank,
do not remove them. The nuts and washers for securing the tank to
the bowl are packaged separately.
Position the tank on the bowl by centering the gasket on the bowl
inlet.
Assemble the washers and nuts to the tank bolts.
Tighten the nuts until snug.
Verify that the tank is level both left to right and front to back.
Make sure the nuts are tight enough to achieve a watertight seal.
Kohler Co.
Tank Bolt
Gasket
5 1007284-2-D