Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
D811_IFU_EN.fm Page 12 Friday, September 7, 2007 8:01 PM
Back
5. Press
to return to the previous menu level or
>
to standby.
PABX access code
If your D801 is connected to a switchboard, you may need to
enter a
one-digit access code in the dialling sequence to be able to
connect to the outside line.
The access code will be displayed at the beginning of a number
on the screen.
The access code will not be used when you dial the number
yourself (rather than for example from the phonebook). This
allows you to make calls to other switchboard extensions.
Menu
Settings
Select
1. Press
, scroll
to
and press
.
d
Set Handset
Select
2.
is highlighted. Press
.
PABX Access Code
Select
3. Scroll
to
and press
.
d
On
Off
Set Code
Select
4. Scroll
or
to
,
or
then press
u
d
Set Code
If you select
, enter the switchboard access code
Save
e.g. 9 then press
.
Back
5. Press
to return to the previous menu level or
>
to standby.
12
to return
5. Base settings
Base ringtone
Select from 5 base ringtones.
You will hear a sample ring for each one you highlight.
Menu
Settings
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
Ringtone
Select
3.
is highlighted. Press
.
4. Scroll
or
highlight the ringtone you want.
u
d
Select
5. Press
to confirm.
Back
6. Press
to return to the previous menu level or
to standby.
Base ringer volume
The base has 5 ringer volume settings plus Off.
Menu
Settings
1. Press
, scroll
to
and press
d
.
Set Base
Select
2. Scroll
to
and press
.
d
Ringer Volume
Select
3. Scroll
to
and press
d
4. Press
or
to display the volume level you want. Press
u
d
to return
Select
to confirm.
Back
5. Press
to return to the previous menu level or
to standby.
Dialling mode
Your D801 is pre-set to Tone dialling. You should not normally need
to change this setting. The dial mode options are Tone or Pulse.
Menu
Settings
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
Dialling Mode
Select
3. Scroll
to
and press
d
Pulse
Tone
4. Press
or
to highlight
or
u
d
confirm.
Back
5. Press
to return to the previous menu level or
to standby.
Ring priority
When you have more than one handset registered to your
base, you can set one handset to ring before the other
handsets. This allows one handset user to answer all incoming
first, like a receptionist.
All Handsets
Choose
if you want all handsets to ring at the same
Select Handset
time or
to nominate a handset to ring two times
before the others.
Menu
Settings
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
Ring Priority
Select
3. Scroll
to
and press
d
4. Press
or
to highlight
u
d
Select
press
.
Select Handset
If you choose
displayed. Scroll
or
u
d
Select
then press
.
Scroll
or
to the number of rings you want to set 2, 4
Select
.
u
d
Select
or 6 and press
.
Back
5. Press
to return to the previous menu level or
to standby.
Recall mode
to return
>
Menu
Settings
1. Press
, scroll
to
d
Set Base
2. Scroll
to
and press
d
Recall Mode
3. Scroll
to
and press
d
4. Press
or
to highlight
u
d
confirm.
Select
.
Back
5. Press
to return to the previous menu level or
to standby.
.
First ring
If you have subscribed to your network's Caller Display service, your
to return
D801801 does not ring until the caller information has been
>
received and displayed.
However, if you want your handset to ring without waiting for
the caller information to be displayed, set First Ring to On.
Please note that this will mean the first ring you hear will be the
default ringtone. This will change to any ringtone you have set
Select
.
once the caller information is displayed.
Menu
Settings
1. Press
, scroll
to
.
d
Set Base
2. Scroll
Select
to
and press
then press
to
d
First Ring
3. Scroll
to
and press
d
On
Off
4. Press
or
to
or
to return
u
d
>
Back
5. Press
to return to the previous menu level or
to standby.
System PIN
The System PIN is used when changing certain settings and
registration / de-registration. The default setting is 0000. You
can change this to your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
Menu
Settings
1. Press
, scroll
to
d
Set Base
2. Scroll
to
and press
d
Select
System PIN
3. Scroll
.
to
and press
d
4. Enter the old PIN (original setting 0000) and press
5. Enter the new PIN and press
.
All Handsets
Select Handset
or
then
all available handsets are
to highlight the handset you want
to return
>
Select
and press
.
Select
.
Select
.
Recall 1
Recall 2
Select
or
then press
to
to return
>
Select
and press
.
Select
.
Select
.
Select
then press
to confirm.
to return
>
Select
and press
.
Select
.
Select
.
OK
.
OK
.
Base settings
Publicidad
Capítulos
Tabla de contenido
