LED Indicators
Once the camera is connected to the network, the connection status
LEDs will display the camera's progress in connecting to the Network
Video Management software.
The following table describes what the LEDs indicate:
Table:LED Indicators
Connection
Connection
State
Status LED
No Link
Off
Obtaining IP
One short
Address
flash every
second
Connecting
Two short
to NVR
flashes every
second
Upgrading
Two short
Firmware
flashes and
one long flash
every second
Connected
On
Description
Not physically connected to any
network device.
Attempting to obtain an IP address.
An IP address has been obtained and
is attempting to connect to the server
Updating the firmware.
Connected to the Network Video
Management software.
13