Setup Menu - Samsung 4 Serie Manual Del Usuario

Basic Features
✎
According to the type of broadcast signal, MPEG
/ HE-AAC can be adjusted between -10dB and
0dB.
✎
To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
¦ Selecting the Sound Mode
When you set to Dual f-g, the current sound
mode is displayed on the screen.
Audio
Type
Mono
A2
Stereo
Stereo
Dual
Mono
NICAM Stereo
Stereo
Dual
18
English
Dual f-g Default
Mono
Automatic
change
Stereo  Mono
Dual f
Dual f  Dual g
Mono
Automatic
change
Mono  Stereo
Mono  Dual f
Dual f
Dual g 
✎
If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.
✎
Only activated in stereo sound signal.
✎
Only available when the Input source is set to TV.
¦ Setting the Time
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
✎
The antenna must be connected in order to set
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute
manually.
✎
Available only when Clock Mode is set to
Manual.
¦ Using the Sleep Timer
■ Sleep Timer
TV after a preset period of time. (Off, 30, 60, 90, 120,
150 and 180 minutes).
✎
To cancel Sleep Timer, select Off.
DUAL
¦ Setting the On / Off Timer
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time
Inactivate
Off Time
Inactivate
Volume
10
Repeat
Once

Setup Menu

INFO button.
t
: Automatically shuts down the
Timer 1
▲
00
▼
00
Source Antenna
TV ATV
Sun Mon Tue Wed
L Move U Adjust E Enter R Return
00
00
Channel
1
Thu Fri Sat