Sanyo SC-TA3000 Manual De Instrucciones página 6

5. Turn on the switch.
Note: The rotating brushes are designed to stop rotating when the vacuum cleaner is in the
upright position.
6. After using.
Return the vacuum cleaner to the upright position, and press down on the on/off switch
pedal. Disconnect the power cord plug from the outlet.
2 Press the on/off switch pedal.
Press the handle release pedal.
1
Upright Position
1 Press down with your foot on the handle
release pedal and pull back on the handle
until it releases from its upright position.
(At about 30˚, it will relock. Press down on
the handle release pedal again to move to the
parallel position.)
2 Press down with your foot on the on/off
switch pedal to turn the unit on. Press once
again to shut it off.
Normal Position
Parallel Position
6
30˚