Emptying The Dust Container - Sanyo SC-TA3000 Manual De Instrucciones

EMPTYING THE DUST CONTAINER

CAUTION
Carefully empty out dirt and debris. Very fine dirt and dust particles may seal the
filter and cause loss of suction, as well as damage to the motor.
• Always turn off the vacuum cleaner when emptying the dust container.
• Exceeding the "Max" fill line may cause dirt and debris to seal the filter and cause
loss of suction.
• Empty the dust container before reaching the "Max" fill line and clean the filter often
to prevent various types of dirt particles from sealing the filter.
• Since fine dust, powders and other types of small dirt particles can collect into the
filter after carpet cleaning, suction may weaken. When this happens, please refer to
the Maintenance section on page 9.
1. Remove the dust container.
Press the dust container button to detach
the dust container.
Push
1
Detach
2
2. Remove the dust container cover.
Detaching
Detach
2
DUST
CONTAINER
LEVER
Push
1
Push the dust container lever and remove.
To attach, join the tab into the slot.
3. Empty the accumulated dirt and
debris from the dust container.
Dust Container
Button
Attaching
Close
2
SLOT
1
TAB
8
4. Remove the filter from the dust
container cover.
Detaching
Turn
1
Detach
2
Filter
Turn filter counterclockwise to remove.
When filter is clogged with dirt and
debris, remove the filter and wipe off
debris with a tissue.
Attaching
Turn
1
To reattach the filter, turn and align the
convex tab on the filter to the
(triangle mark) as shown in
the illustration.
Turn
Filter's Convex Tab
5. Shake off dust and dirt from filter.
Dust Container
Cover
Side view