Tabla de contenido
Publicidad
ESAB CUTMASTER 80
2.04 Power Supply Specifications
Input Power
Input Power Cable
Input Power Cable
Output Current
Power Supply Gas
Filtering Ability
Ambient Temperature
Rating
All Units
* NOTE: The duty cycle will be reduced if the primary input power (AC) is low or the output voltage (DC) is
NOTE!
IEC Rating is determined as specified by the International Electro-Technical Commission.
These specifications include calculating an output voltage based upon power supply rated
current. To facilitate comparison between power supplies, all manufacturers use this out-
put voltage to determine duty cycle.
Power Supply Dimensions & Weight
12"
305 mm
15"
381 mm
43 lb / 19.5 kg
2-2
ESAB Cutmaster 80 Power Supply Specifications
400 VAC (360 - 440 VAC), Three Phase, 50/60 Hz
Power Supply includes input power cable.
For cables at other input voltages see section 2.05.
ESAB Cutmaster 80 Power Supply Duty Cycle *
IEC
Duty Cycle
40%
80 Amps
Current
112
DC Voltage
higher than shown in this chart.
Art # A-12888
24"
610 mm
INTRODUCTION
Power Supply includes input cable.
Cable for 400V 3 Phase.
20 - 80 Amps, Continuously Adjustable
Particulates to 5 Microns
Duty Cycle Ratings @ 40° C (104° F)
Operating Range 0° - 50° C
CE
IEC
40%
60%
80 Amps 65 Amps 65 Amps
112
106
Ventilation Clearance Requirements
24"
610 mm
150 mm
CE
IEC
60%
100%
100%
50 Amps
50 Amps
106
100
Art # A-07925_AB
6"
300X5396
CE
100
Publicidad
Tabla de contenido
