Using An Optional Neckloop - Williams Sound Pocketalker 2.0 PKT E1 Manual Del Usuario

on both as needed.
5. If attaching the microphone to another person, ask them to
ernal
begin speaking and adjust the volume as necessary.
rophone
C 014-R
Placement of Mic Clip on TV
.5mm
Cord

Using an Optional Neckloop

Williams Sound's optional neckloop (NKL 001) can be used with
the Pocketalker in situations where the Pocketalker is needed, and
the user has a hearing aid with a T-coil.
How it works: The Pocketalker picks up the sound with the
internal or external microphone, and sends it into the neckloop.
The neckloop magnetically couples with the T-coil in the listener's
hearing aid(s). With the hearing aid T-coil switch on, the listener
can hear the sound directly in their hearing aid(s).
To use the neckloop: Place the neckloop around your neck as
shown below. While holding the housing with one hand, pull up on
the cord lock bead with the other hand to tighten for comfort. Plug
the neckloop into the headphone jack on the Pocketalker. Turn on
the T-coil in the hearing aid(s). Turn on the Pocketalker and adjust
the volume to a comfortable listening level.
External Microphone
(MIC 014-R)
Plastic Clip
(PLC 004)
3.5mm - 3.5mm
Extension Cord
(WCA 007)
TV Speaker
A544
13