Headphone/Earphone Jack
Pocketalker
Clip
5. Wear the earphone or headphone so it fits comfortably.
6. Adjust the balance for the type of headphone or earphone
being used. Using a small screwdriver, turn left (or right) to
increase (or decrease) the volume level on the left or right side
of the headphones.
Note: If using a single/mono headphone/earphone or a neckloop, turn
the balance fully left (counter-clockwise) - this will maximize volume
and help to maximize battery life.
Balance Adjustment - Single/Dual Earphones
Battery
Pocketalker
Compartment
Lanyard Slot
phone
ophone
7. Close the battery compartment cover: align the cover on the
back of the unit and slide it upwards until it snaps into place.
8. Optional: If the external microphone (MIC 014-R) will be used,
plug it into the External Microphone Jack on the top of the unit.
2.0: Left Side View
®
Adjust
2.0: Battery Compartment
®
Balance
Adjust
Left
Right
(Mono)
Headphone/
Earphone
Jack
Adjust
Tone Adjust
Rotary Dial
Balance
Control
(Fully
counter-
clockwise
= Mono)
Power On
Volume+
Tone
Adjust
Dial
Volume-
Power Off
7