Unold 48870 Instrucciones De Uso página 29

Ocultar thumbs Ver también para 48870:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
Mix
When the ingredients need to be
mixed evenly before starting the
programme, please choose this
programme selection before the
ice cream preparation. The ingre-
dients are mixed 60 minutes at
maximum. By turning the rotary
knob, an appropriate time selec-
tion within a range of 60 minu-
tes to 5 minutes is possible. 10
minutes is the prescribed stan-
dard setting.
14. Important: once you have selec-
ted a program, you cannot change
it while the program is running.
You then have to use the POWER
switch to switch the appliance off
and back on again. However, the
"Mix andFreeze" and "Mix" pro-
grams can be paused by pres-
sing the START/PAUSE button. If
you pause the program, the time
which was set will continue run-
ning. As soon as you press the
START/PAUSE button again, the
appliance will resume operation.
The "Freeze" program cannot be
paused.
15. Now press the START/PAUSE but-
ton. The appliance starts mixing
the ingredients.
16. The remaining time is shown on
the display.
17. During operation, you can change
the duration of operation by set-
ting the desired time via the
rotary knob. If you turn the knob
to the left, the time will be shor-
tened in 1-minute increments, if
you turn the knob to the right, the
time will be extended in 1-minute
increments. The minimum prepa-
Copyright UNOLD AG | www.unold.de
ration time is 5 minutes, shorter
times cannot be set.
18. After expiration of the set time
the appliance automatically swit-
ches off and a signal beeps ten
times. The display shows 00.
19. If the ice cream is not removed
immediately after the program
ends, after ten minutes the auto-
matic keep-cool phase switches
on. The keep-cool phase keeps
the ice cream cool for 120 minu-
tes. After these 120 minutes
elapse, the keep-cool phase swit-
ches off and the appliance is now
in standby mode again, as descri-
bed in point 10.
Remove ice cream
20. Before removing the ice cream
from the appliance, switch off the
appliance with the POWER switch
and unplug the power cord from
the electrical outlet.
21. Remove the transparent lid.
22. Remove the ice cream container
from the appliance and carefully
pull the mixer out of the contai-
ner.
23. Transfer the ice cream to a suita-
ble container. Do not use sharp or
pointed objects for this; instead,
use a plastic or wooden spoon in
order not to damage the ice cream
container. We recommend using a
silicone dough scraper.
24. If desired, you can make more ice
cream right away. In this case,
start again with step number 1.
25. Tip: If you make fruit ice cream
or sorbet, remove the ice cream
container as soon as the program
is finished, transfer the ice cream
to a container suitable for freezing
29

Publicidad

Tabla de contenido
loading

Tabla de contenido