Air Flow Velocity And Direction Adjustment; Swing Operation - Mitsubishi Electric Mr.SLIM MSH24W Manual De Instrucciones

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT

I
AIR FLOW velocity and direction can be selected
as required.
•
Use the
•
If the operating sound of the air conditioner disturbs your
sleep, use the
I
˚C
CLOCK
AMPM
AMPM

SWING OPERATION

TOO TOO
ON/OFF
WARM COOL Use the swing operation for the air flow to reach all cor-
ners of the room.
Recommended HORIZONTAL
VANE range
FAN STOP
Use the
ally.
I FEEL COOL
Use position
VANE START
COOL or DRY mode and use posi-
HEAT DRY
tions (3) to (5) in the HEAT mode
when adjusting to your require-
MODE WIDE VANE HR.
ments.
LONG MIN.
NOTE
I In the cooling operation, when the air conditioner is op-
RESET CLOCK erated with setting the HORIZONTAL VANE to
(5) for 1 hour, the AIR FLOW direction is automatically
set to horizontal to prevent condensed water from drop-
ping.
I Adjust the vertical AIR FLOW direction using the remote
controller. If the HORIZONTAL VANE is moved manually,
it may cause trouble.
I In the heating operation, if the air flow temperature is
too low or when defrosting is being done, the HORIZON-
TAL VANE position is set to
To change the AIR FLOW velocity, press
FAN
the button.
Each time the button is pressed, the fan speed is
changed in sequence: (Low) → → → → → (Med.) → → → → →
(High)
→ → → → →
(AUTO)
(High) notch to cool/heat the room more.
(Low) notch.
To change the AIR FLOW blowing direc-
VANE
tion vertically, press the button.
Each time the button is pressed, the angle of the
HORIZONTAL VANE is changed in sequence: (1) → → → → →
(2) → → → → → (3) → → → → → (4) → → → → → (5) → → → → → (SWING) → → → → →
(AUTO)
1
COOL/
2
(AUTO) position usu- DRY
3
(1) or (2) in the
4
HEAT
5
(4) or
(1).
Auto air flow direction control operation
I When the AUTO mode is selected with the
VANE
button, the position of the HORIZONTAL VANE is automatically
set to correspond to the operation mode for effective operation.
(1) HEAT
When the air flow temperature is When the air flow temperature rises,
too low, the air is blown out hori- the air is blown out downwards.
zontally.
I
To change the AIR FLOW blowing direction horizontally, press the
Each time the button is pressed, the angle of the VERTICAL VANE is changed in sequence:
→ → → → → → → → → → → → → → → → → → → → (SWING) → → → → →
SWING OPERATION
Use the swing operation for the air flow to reach all corners of the room.
Horizontal AIR FLOW blowing range
About 100°
COOL/DRY
About 150°
HEAT
NOTE
Adjust the horizontal AIR FLOW direction using the remote controller. If the VERTICAL VANE is moved manu-
ally, it may cause trouble.
(2) COOL, DRY
The air is blown out horizontally.
WIDE VANE
button.
→ → → → →
9