Specifications - Stihl MSE 220 Manual De Instrucciones

Specifications

Engine
Voltage 120 V
Frequency 60 Hz
Rating 1.7 kW
Enclosure IP 20
Insulation II
Amp rating 15 A
Chain lubrication
Fully automatic speed-controlled oil
pump
Oil tank capacity
3
6.8 oz. (200 cm )
Weight
without bar
and chain 11.5 lb (5.2 kg)
MSE 220
Cutting Attachment
Recommended cutting attachments for
compliance with § 5.11 of ANSI standard
B 175.1-2000
(see page 13 of this manual):
Guide bar
STIHL reduced kickback bar
(with green label) for 3/8" P pitch:
Rollomatic with sprocket nose 16, 18 or
20 in (40, 45 or 50 cm)
Oilomatic chain
STIHL low kickback chain*
(with green label) for 3/8" P pitch:
3/8" (9,32 mm) Rapid-Micro (33 RM2,
36 RM2, 33 RSC3, 36 RSC3)
Spur sprocket
8-tooth for 3/8" P pitch
Since new bar/chain combinations may
be developed after publication of this
manual, ask your STIHL dealer for the
latest recommendations.
English / USA
In order to comply with the kickback
performance requirements of § 5.11 of
ANSI standard B 175.1-2000, do not use
replacement saw chain unless it has
been designated as meeting the ANSI §
5.11 requirements on this specific
powerhead, or has been designated as
"low kickback" saw chain1) in
accordance with the ANSI B 175.1-2000
standard.
Other bars and chains available for this
powerhead are:
STIHL yellow-labeled bars:
For 3/8" pitch:
Rollomatic "S" sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
Duromatic with stellite tipped nose
16, 18 or 20 in (40, 45 or 50 cm)
STIHL yellow-labeled chains:
For 3/8" pitch:
Rapid-Micro (33 RM, 36 RM),
Rapid-Super (33 RSC, 36 RSC,
33 RSK, 36 RSK)
* see definition of "low kickback chain"
on page 15 of this manual.
41