Factory Reset - Alesis SamplePad 4 Guia Del Usuario

Load Samples/Kits Via USB
•
After this feature is selected, SamplePad 4 will connect to your
Mac or PC via the USB connection for easy SD card
management. To exit this mode, hold Cursor Left and Cursor Up
on SamplePad 4 for two seconds.
Other
• Pad Curve: Selects the velocity curve sensitivity setting (1-8) to
be used across all of the internal pads. You can audition the Pad
Curve by striking a pad while changing this setting.
• Auto-Shutdown Time: Selects how long SamplePad 4 will
remain powered on if there is no activity. Select from 30
minutes, 60 minutes, or Off (SamplePad 4 will remain powered
on until you manually power it off).
Saving a Kit
1. Select the kit on the main screen that you have edited and
would like to save.
2. Press and hold the Cursor Down and Cursor Right buttons for
2 seconds simultaneously to enter the Save menu.
3. Move the cursor to the SAVE KIT option by pressing the Cursor
Up or Cursor Down buttons.
4. Press Cursor Right to enter the SAVE KIT submenu.
5. Press Cursor Up or Cursor Down to highlight "Yes" and then
press Cursor Right to save the kit.
6. To exit the SAVE KIT submenu, press the Cursor Down button
until Exit is highlighted, and then press the Cursor Right
button. Alternatively, press and hold the Cursor Down and
Cursor Right buttons to exit this menu.
Copying a Kit
1. Press and hold the Cursor Down and Cursor Right buttons for
2 seconds to enter the Save menu.
2. Move the cursor to the COPY KIT option by pressing the Cursor
Up or Cursor Down buttons.
3. Press Cursor Right to enter the COPY KIT submenu.
4. Press Cursor Left or Cursor Right to select the kit that you
would like to copy.
5. Press Cursor Down and then press Cursor Left or Cursor
Right to select the location that you would like to copy the kit to.
6. Press Cursor Down to highlight Confirm > highlight Yes, and
then Cursor Right to copy the kit.
7. To exit the COPY KIT submenu, press the Cursor Down button
until Exit is highlighted, and then press the Cursor Right button.
Alternatively, press and hold the Cursor Down and Cursor
Right buttons to exit this menu.

Factory Reset

To reset the internal kits and global settings to the factory default settings, hold the Cursor Left and Cursor Right
buttons while powering on the SamplePad 4. This will not affect samples or kits stored on your SD card.
9