Yealink SIP-T27G Guia De Inicio Rapido página 6

E
N
G
L
3. Connect the USB flash drive, as shown below:
I
S
H
Note: The USB port can also be used to connect Bluetooth USB dongle BT40 or Wi-Fi USB dongle WF40/WF50.
The Bluetooth USB dongle BT40 or Wi-Fi USB dongle WF40/WF50 should be purchased separately. For
more information on how to use the BT40, WF40 or WF50, refer to Yealink Bluetooth USB Dongle BT40
User Guide, Yealink Wi-Fi USB Dongle WF40 User Guide or Yealink Wi-Fi USB Dongle WF50 User Guide
4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one
to use.
The IP phone should be used with Yealink original power adapter (5V/1.2A)
Note:
may cause the damage to the phone.
cable provided by Yealink.
If inline power (PoE) is provided, you don't need to connect the power adapter. Make sure the
hub/switch is PoE-compliant.
Startup
After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready for
use. You can configure the phone via phone user interface
or web user interface.
2
PC Connection
(Optional)
PC
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
PC
PC Connection
(Optional)
If you are connecting a PC to your phone, we recommend that you use the Ethernet
Power Adapter
(DC 5V)
IEEE 802.3af compliant
PoE Hub/Switch
only.The use of the third-party power adapter
.