HellermannTyton EVO7 Manual De Instrucciones página 36

EVO7 EVO7SP
General
Please read the operating instructions carefully before using the EVO7 / EVO7SP Tool. We are not liable
for any damage and claims arising from the improper operation or use of the cable tie installation tool.
We are not responsible for any damages caused by defects resulting from inappropriate or unsuitable
use of the tool, incorrect or careless treatment, normal wear and tear as well as any modifications
made to the tool by the customer or a third party.
Safety instructions
a These operating instructions should be studied carefully before initial use of the EVO7 / EVO7SP tool.
a It is important that these instructions are understood by all personnel using this tool.
a The HellermannTyton tension tool EVO7 / EVO7SP may only be used for the purpose described in
these operating instructions.
a The tool should only be used by trained personnel.
a Any unauthorized modification to the tool carried out by the user will invalidate the
manufacturer's liability to any resulting damage or injury to personnel.
a All tools meet the required safety standards before leaving the factory. If any apparent misuse of the
tool is evident, then the warranty will be invalidated and an appropriate repair charge will be made.
a No safety or protective systems may be removed or made ineffective.
a The tension tool must only be repaired/maintained by the manufacturer or by skilled persons
trained by HellermannTyton.
Caution: Safety glasses should be worn!