Figure 3: Dimension drawings for read heads CMS-R-C.. / CMS-R-E..
Dimension drawings for actuators CMS-M-C. / CMS-M-E.
Combination options for evaluation units CMS-E-AR, CMS-E-BR, CMS-E-ER, CMS-E-FR
Design
3)
M25
M30
M25
M30
1) Old conductor coloring in brackets.
2) There must be no ferromagnetic material in the vicinity of the read head or the actuator. All data refer to the frontal approach direction and a center offset of m = 0.
3) The LED for the contact status indication has an internal series resistor of 1.5 kΩ.
4) Operating distance for contact status indication and LED.
5) The minimum switching distance S
between read head and actuator is 1 mm. If the distance is less than this, the evaluation unit changes to the fault state.