TIMER ON/OFF
The UPPER or LOWER TIMER ON/OFF serves as an extra
timer in the kitchen that will beep when the set time has
run out. It does not start or stop cooking.
The UPPER or LOWER TIMER ON/OFF feature can be
used during any of the other oven control functions.
The UPPER and LOWER TIMER can be operated
independently of each other.
To set the Timer (for example to set 5 minutes):
1. Press UPPER TIMER ON/OFF or LOWER TIMER ON/
OFF twice.
0:00 will appear and TIMER will flash in the display.
2. Press 5 in the number button.
0:05 will appear in the display.
3. Press TIMER ON/OFF to start the Timer. The
remaining time countdown will appear in the display.
NOTE
If UPPER TIMER ON/OFF or LOWER TIMER ON/OFF
is not pressed, the timer will return to the time of day.
4. When the set time has run out, End will show in
the display. The indicator tones will sound every
15 seconds until UPPER TIMER ON/OFF or LOWER
TIMER ON/OFF is pressed.
NOTE
If the remaining time is not in the display, recall the
remaining time by pressing the UPPER TIMER ON/
OFF or LOWER TIMER ON/OFF.
NOTE
• If you press UPPER TIMER ON/OFF or LOWER
TIMER ON/OFF once, it allows you to set the time in
seconds.
• If you press UPPER TIMER ON/OFF or LOWER
TIMER ON/OFF twice, it allows you to set the time
in minutes.
To cancel the Timer before the set time has run
out:
1. Press UPPER TIMER ON/OFF or LOWER TIMER ON/
OFF once.
The display will return to the time of day.
CONVECTION AUTO CONVERSION
(ON SOME MODELS)
When cooking using a convection cycle (Conv. bake and
roast), the oven temperature is automatically reduced by
25°F. The display will show the changed temperature.
This feature is called "AUTO CONVERSION". Your range
comes with this feature "ENABLED".
To DISABLE the auto conversion feature, follow
instructions below.
1. Press the SETTING button one time. "AUTO" will
appear in the display.
2. Press the 1 button to ENABLE or press the 2 button
to DISABLE.
3. Press the START button to accept the change.
OVEN TEMPERATURE
ADJUSTMENT
You may find that your new oven cooks differently than
the one it replaced. Use your new oven for a few weeks
to become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too cold,
you can adjust the oven temperature yourself.
Adjusting the oven temperature
1. Press the SETTING button until "L-AJ" or "U-AJ"
appears in the display
2. Using the number buttons, enter the amount of
degrees that you wish to adjust the oven.
3. Press the SETTING button repeatedly to toggle
between plus (+) or minus (-) to adjust the
temperature either up or down.
4. Press the START button to accept the change.
NOTE
• This adjustment will not affect the broiling or
Self Clean temperatures. The adjustment will be
retained in memory after a power failure. The oven
temperature can be increased (+) or decreased (-)
as much as 35°F or 19°C.
• Once the temperature is increased or decreased,
the display will show the adjusted temperature
until it readjusts.
15
FEATURES