Cleaning And Maintenance - Domo DO7294S Manual De Instrucciones

ACCESSORIES
1. Crevice nozzle: for hard to reach areas like radiators, crevices, corners, in
between pillows,...
2. Dust brush: for furniture, shelves,...
3. Furniture nozzle: for easy, quick and thorough cleaning of upholstered
furniture
4. Floor brush: for vacuuming hard flooring
USE
1. Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label on the cord
indicates the maximum length of the cord, that should not be exceeded.
2. To turn the vacuum cleaner on and off, press the foot pedal with the
3. To adjust the suction power, turn the suction power regulator to the left or or right between the
MIN and MAX indicators. For delicate materials it is best to use the minimum power level, a medium
power is recommended for matresses, furniture and carpets and the maximum power level should
be used for tiles, wood and other hard floors.
· The vacuum is suitable for all floors. The switch on the mouth of the floor suction head folds in
the wheels for vacuuming carpet.
· Slide the valve on the hose into the closed or open position to increase or reduce the suction
power.
4. When you have finished vacuuming, unplug the vacuum cleaner and automatically rewind the cord
by pressing the foot pedal with the
forth while rewinding the cord, by guiding the cord with your hand. This to prevent possible damage.

CLEANING AND MAINTENANCE

CHANGING THE DUST BAG
The vacuum cleaner cannot be used without the dust bag. When the dust bag is full or damaged you need
to replace it immediately. The dust bag full indicator turns red when you need to replace it.
1. Remove the flexible hose.
2. Open the top of the dust bag reservoir via the cover.
3. Remove the dust bag and place a new one in the correct position.
Note: you can clean the dust bag by washing it in water. You can then reuse the dust bag. Dry the bag well
before placing it back in the vacuum cleaner.
1
THE FILTERS
The appliance has 2 filters. In a normal cleaning session, it is sufficient to tap out the filters. It is
recommended that you thoroughly clean the filters under tepid running water 3 to 4 times per year.
Make sure that it is completely dry before putting it back in the appliance. You can also replace them if
necessary. Avoid direct sunlight or intense overheating. Never put the filters in the washing appliance to
prevent deformation. Do not use abrasive or cleaning products and wash from the bottom of the filter.
24
DO7294S
symbol. Make sure that the plug does not whip back and
2
3 2 1
symbol.
3
4