Panasonic CZ-RWSU2 Instrucciones De Funcionamiento página 20

Sistema de control remoto inalámbrico
Ocultar thumbs Ver también para CZ-RWSU2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 135
12. Emergency Operation (Cont.)
Note
• The Test Run/On and Test/On switches are for use when the unit is installed and test run. It is not for normal
use.
• If the [Normal/Stop ALL] switch is on
CZ-RWSC3/CZ-RWSL2
1. Press [Emergency Operation]
If the indoor temperature is 24 °C or greater when the unit starts running, it will act as a cooler.
If the indoor temperature is less than 24 °C when the unit starts running, it will act as a heater.
2. If you press
, the wind direction automatically oscillates up and down.
Stop: press [Emergency Operation]
CZ-RWSL2
Note
• The Test Run/On and Test/On switches are for use when the unit is installed and test run. It is not for normal
use.
• If the [Normal/Stop ALL] switch is on
Stop ALL
, the unit cannot receive signals from the remote control.
of the receiver.
of the receiver again.
CZ-RWSC3
2
1
Stop ALL
, the unit cannot receive signals from the remote control.
EN-18
1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cz-rwst2Cz-rwsl2Cz-rwst3Cz-rwsc3Cz-rwsy2Cz-rwsk2

Tabla de contenido