Operating Conditions; Settings And Adjustments - Bevel Tools Mite ABIS-06 Instrucciones De Funcionamiento

2.5 Operating conditions

Temperature range during operation: 0 to +50°C
Relative air humidity: 95% at +10°C not condensed
i

3.1 Settings and adjustments

The machine may only be operated with the flange head!
Rotate flange head counter-clockwise
to install and clockwise to remove
Locking ring
Rubber grip handle
EN
Mounting a bevel head:
Turn flange head completely off. Hold
the spindle with 17 mm open end
wrench. Place bevel head and fasten
bearing with 4 mm Hex wrench.
Turn flange head back on.
Attach air fitting here
85 PSI required @ 11 CFM
4
ON/OFF handle