OPERATION
Cancel settings
Timer and automatic function settings may be
cancelled at any time.
Cancel automatic function settings:
● Simultaneously touch and hold the < / >
sensors.
Cancel timer settings:
● Touch the MENU sensor to select the
Kitchen Timer.
● Simultaneously touch the < / > sensors.
Change the beep tone
You can change the beep tones as follows:
● Simultaneously touch and hold the < / >
sensors.
● Touch MENU repeatedly to select the ton
(tone). The display will be flashing ton I.
● Touch < / > to select the preferred tone:
Use the > to select the setting 1 to 3
Use the < to select the setting 3 to 1.
Adjust display brightness
You can adjust display brightness 1 to 9,
where 1 is the darkest and 9 is the brightest.
The brightness setting applies to an inac-
tive control panel, i.e. when no controls are
touched for 7 seconds.
You can adjust display brightness as follows:
● Simultaneously touch and hold the < / >
sensors.
● Touch MENU repeatedly to select the bri
(brightness) setting — the settings can be
accessed in sequence ton (tone) and bri
(brightness).
● Touch < / > to select the preferred bright-
ness:
Use the > to select the setting 1 to 9
Use the < to select the setting 9 to 1.
Night Mode
The display is dimmed during the night hours
22:00 — 06:00.
43