Control Panel - Panasonic NN-SN968 Instrucciones De Operación

IP4278_38W73AP_01_120507:IP4278_38W73AP_00_120507 2012-5-7 Jerry
display Window
Popcorn Button
(* page 13)
sensor reheat Button
(* page 16)
Power level Pad
(* page 12)
quick Min Pad
(* page 12)
Number Pads
timer Pad
(* page 19)
stop/reset Button
before cooking: One tap
clears all your instructions.
during cooking: One tap
temporarily stops the cooking
process. Another tap cancels
all your instructions, and time
of day or colon appears in the
display Window.
beep sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
note:
If no operation after cooking program setting, 6 minutes later, the oven will automatically
cancel the cooking program. The display will return to clock or colon display.

control Panel

10
13:45 Page 12
* The control panel of
NN-SN942W/SN942B
have the same key
layout.
sensor cook Button
(* page 16)
inverter turbo defrost
Pad (* page 14)
Keep Warm Pad
(* page 12)
less Pad (* page 13)
More Pad (* page 13)
clock Pad
(* page 11)
start Button
After cooking program
setting, one tap allows
oven to begin functioning.
If door is opened or
stop/reset Button is
pressed once during oven
operation, start Button
must be pressed again to
restart oven.