Typical Connection And Cable Section; Modalita' D'INstallazione - Elvox EA60 Manual De Instrucciones

GB

TYPICAL CONNECTION AND CABLE SECTION

Art. ECA8
4X0,75mm2
4X0,75mm2
3X1,5mm2
Line
Linea 230V

MODALITA' D'INSTALLAZIONE

1 - Before fastening the brackets provided, establish the coordinates
using the data given in Table 1, bearing in mind that they are valid if
the operator is at maximum extension minus one centimetre of the
available stroke (CD) when the gate is closed to obtain maximum
working efficiency.
2- Data B in the table, with reference to the single values A, are to be
considered as values (recommended).
3- To anchor the piston, use the fastening brackets provided.
COORDINATES AND TABLE
1. Establish coordinates A + B that are to be used.
2. Note: The available stroke (CD) of the operator must never be equal
or greater than the stroke used (CU)
3. The sum of coordinates A + B, establishes the stroke used CU.
TABLE 1
Opening angle
90° Available stroke = 400mm (Art. EA60)
90° Available stroke = 500mm (Art. EA80)
Note1: A+B = CU (Stroke used)
EA60 - EA80
2X1,5mm2 (24 Vdc)
4X1,5mm2 (230 Vca)
2X0,75mm2
RX Photocell
RX fotocellula
Art. EFA1
Art. EDS1
A
160
175
190
200
250
CD = (Available stroke) = 400/500 mm
8/28
TX Photocell
TX fotocellula
2X0,75mm2
B
160
175
190
200
250
Art. ELA1/L
Art. EFA1
Cu
320
360
320
400
500