Descargar Imprimir esta página

Dacor DRF42 Serie Manual Del Usuario página 31

Refrigerador incorporado
Ocultar thumbs Ver también para DRF42 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

- TALR (L4) mode is automatically deactivated after it lasts for the received duration
(max. 15 minutes), or when the Override key is pressed. The mode is immediately
deactivated and the refrigerator returns to the normal state when the door is
opened or closed, or the dispenser is used.
To check the MAC address
In this mode, the MAC address appears in the temperature panel (on both the freezer and
the fridge sections of the panel) sequentially for 1 minute.
1. Press and hold both Freezer and Fridge for 6 seconds. The temperature panel blinks.
Then, press Freezer again to display the MAC address. The fridge beeps.
2. For example, if the MAC address is "11-22-33-44-55-66", the temperature panel
displays the address for 1 minute in this sequence: "-- / --"  "11 / 22"  "33 / 44" 
"55 / 66"  "-- / --".
After 1 minute, the MAC address disappears and the temperature panel returns to the
normal state.
NOTE
The temperature panel displays "-- / --" for an unknown MAC address or if a Wi-Fi
connection is not established or is lost.
Override Mode
When you want the refrigerator to ignore the SMART GRID (Demand Response) signal
from the utility company, you can activate OVERRIDE mode.
When you activate OVERRIDE mode, the refrigerator ignores the SMART GRID (Demand
Response) signal and is not controlled by the utility company.
Activating and deactivating Override mode
1. Press and hold Override for 3 seconds.
2. A chime sounds and 'Or' and 'on' is displayed in the fridge and freezer temperature
displays for 5 seconds.
3. If the refrigerator receives a SMART GRID (Demand Response) signal from the utility
company, 'Or' is displayed in the freezer temperature display.
4. To deactivate OVERRIDE mode, press and hold Override for 3 seconds.
5. A chime sounds and 'Or' and 'oF' is displayed in the fridge and freezer temperature
displays for 5 seconds.
NOTE
Alternatively, you can activate or deactivate OVERRIDE mode using the Samsung Connect
app and the Energy Management function. See the next page.
Dacor_T-TYPE_BRF9000M_DA68-03574J-00_EN.indd 31
English 31
3/12/2020 9:51:50 PM

Publicidad

loading