Maintenance; Warranty - SPARKY BR 100E Instrucciones De Uso

Ocultar thumbs Ver también para BR 100E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
WARNING: These accessories or attach-
ments are recommended for use with your SPARKY
tool specified in this manual. The use of any other ac-
cessories or attachments might present a risk of in-
jury. Only use accessory or attachment for its stated
purpose. If you need any assistance for more details
regarding these accessories, ask your local SPARKY
service centre.

Maintenance

WARNING: Always ensure that the tool is
switched off and unplugged before attempting to perform
inspection or maintenance.
BRUSH REPLACEMENT
When the carbon brushes are worn out, both brushes
must be replaced simultaneously with genuine brushes at
SPARKY service centre for warranty and post-warranty
service.
GENERAL INSPECTION
Regularly inspect all fasteners and ensure they are
properly tightened. Should any of the screws be loose,
retighten it immediately to avoid hazards.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in order
to avoid a safety hazard.
CLEANING
For safe operation always keep the machine and its ventila-
tion slots (5) clean.
With the motor running, blow dirt and dust out of all air
vents with dry air at least once a week. Wear safety
glasses while performing this.
Exterior plastic parts may be cleaned with a damp cloth
and mild detergent.
WARNING: Although exterior plastic parts are
highly solvent resistant, never use solvents!
IMPORTANT! To assure product safety and reliability,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by
certified service centres or other qualified service or-
ganisations, always using genuine replacement parts.
Original instructions

Warranty

The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
Faults due to normal wear, overloading or improper han-
dling will be excluded from the guarantee.
Faults due to defective materials implemented as well as
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
and improvements to the products and to alter specifica-
tions without prior notice.
Specifications may differ from country to country.
7
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Br 101e

Tabla de contenido