Fabric Brush & Creasing Tool; Mini Pressing Board - STEAMONE T22S Manual De Usuario

Fabric Brush & Creasing tool:
Be sure unit is unplugged and completely cool before attaching the
fabric brush & creasing tool.
- The fabric brush & creasing tool is a two-in-one product.
- Align the slot on the back of the fabric brush with the clip
on the bottom of the steam head and gently slide the brush
-
-
fig.27
Remove the fabric brush & creasing tool once unit is unplugged
and completely cool. Remove it by gently pulling down on the
handle of the fabric brush & creasing tool until it comes off of the
steam head.

Mini Pressing Board:

When using the mini board, always steam in a vertical position.
- The mini board is designed to deal with the cuff and the collar of the garment.
-
-
-
fig.29
up on to the face of the steam head. (fig.26)
Fabric Brush Use:
The fabric brush can pick up the lint on
your garment. It can also be extremely
effective on sofas, bedding, curtains,
stuffed animals, rugs and carpets.
1. Gently brush the area to be steamed with
the grain or nap of the fabric.
Creasing Tool Use:
1. Push on the handle to open the creasing
tool. (fig.27)
2. Place the garment between the creasing
tool and steam head. (fig.28)
3. Release the handle of the creasing tool
and starting at the top of the garment,
move the creasing tool in a downward
motion. (fig.28)
Before steaming the cuff and the collar of the
garment, adjust the power to minimum.
Insert the mini board under the collar of the
garment and steam it vertically. (fig.29)
Insert the mini board into the cuff of the garment
and steam it vertically. (fig.30)
fig.26
fig.28
fig.30
12