Before Use; Garment Steamer Assembly; Preparation; Pole Assembly - STEAMONE T22S Manual De Usuario

Before Use

Garment steamer assembly

Preparation:

1. Insert the pole into the opening of the trouser
2. Attach the upper pant clamp to the folding
fig.3

Pole assembly:

1. Place the base on the floor and remove the
fig.5
2. Unscrew and remove the fastening lock from
3. Insert the pole into the fastening lock, place
4.
fig.7
1. Adjust the pole to its maximum height by sliding it upwards
fig.9
2. Slide the hanger on to the pole and tighten the hanger base
3. Place the head support/hook on top of the pole and push
fig.10
stretcher. (fig.3).
hanger and set aside. (fig.4)
water tank. (fig.5)
the base of the steamer. (fig.6)
the pole into the base and turn in a clockwise
direction until the pole is securely in place.
(fig.7)
Tighten the pole's fastening lock by turning in
a clockwise direction until the fastener is
securely in place. (fig.8)

Locking the pole:

then locking the 3 clips. (fig.9)
by turning in a counter clockwise direction. (fig.10)
down to secure. (fig.10)
fig.6
fig.4
fig.6
fig.8
7