allen+roth 1227VA-48-201-903 Manual De Instrucciones página 5

INSTALLATION INSTRUCTIONS
2. To remove drawers preassembled in vanity (A),
fully extend drawers. Locate plastic levers on
metal glide tracks at left and right sides of
drawer box.
To disengage drawer box from glides, push on
plastic levers. Then, gently lift drawer up to
remove it from vanity (A).
3. With the help of another person, place vanity
(A) upside down on a scratch free surface.
Place leg (B) into correct position on vanity (A).
Insert bolts (AA), spring washers (EE) and
washers (BB) into the predrilled holes on the
inside of the vanity (A). Tighten bolts (AA) with
allen wrench (DD). Repeat for additional one
leg (B); DO NOT install the final two legs (B).
Hardware used
Bolt
AA
Washer
BB
Allen wrench
DD
Spring washer
EE
2
A
1
3
B
1
x 4
x 4
1
x 1
x 4
5
DD
AA
EE
BB
1
A
1
2
2